Keyless entry is one of the most convenient features of modern cars, including Ford Taurus. However, like any technology, it is not foolproof and may encounter issues, such as failure to unlock or start the car. One of the troubleshooting steps is resetting the keyless entry system. In this step-by-step guide, we will provide you with easy-to-follow instructions on how to reset the keyless entry on your Ford Taurus.
Step 1: Locate Your Keyless Entry Code
Before you can reset your keyless entry system, you need to know your keyless entry code. The code is a five-digit number that allows you to unlock and start your car without a traditional key. Typically, Ford Taurus owners find their keyless entry code in the owner’s manual, on the inside of the trunk lid, or on a card inside the glove compartment. If you can’t find your keyless entry code, you can retrieve it from your local Ford dealership or by using an OBD-II scanner.
Step 2: Enter Your Keyless Entry Code
Once you have found your keyless entry code, you can proceed with resetting the keyless entry system. Start by entering your keyless entry code using the keypad on the driver’s door. Make sure to press each digit slowly and firmly for the system to recognize it.
Step 3: Hold Down the 3 and 4 Buttons Simultaneously
After entering your keyless entry code, hold down the 3 and 4 buttons on the keypad simultaneously. Keep them pressed for at least 5 seconds or until the interior lights of your car blink twice. This step resets the keyless entry system and clears any previously programmed codes.
Step 4: Enter Your New Keyless Entry Code
After resetting the keyless entry system, you need to set a new code to unlock and start your car. Begin by entering your new keyless entry code using the keypad on the driver’s door. Again, press each digit slowly and firmly for the system to recognize it.
Step 5: Test Your New Keyless Entry Code
Once you have entered your new keyless entry code, test it by unlocking and starting your car. If everything works correctly, you have successfully reset your keyless entry system. If you encounter any issues, repeat the steps mentioned above or contact your local Ford dealership for further assistance.
Additional Tips and Troubleshooting:
- If you forget your keyless entry code, you can retrieve it from your local Ford dealership or by using an OBD-II scanner.
- If your keyless entry system still doesn’t work after resetting it, check the battery of your key fob or contact your local Ford dealership for further assistance.
- If you can’t find your keyless entry code, you can try using the default code, which is 00000. However, we strongly advise against using this default code for security reasons.
Conclusion
Resetting the keyless entry system on your Ford Taurus is a simple process that you can do yourself without any special tools or expertise. By following the steps outlined above, you can fix any issues with your keyless entry system and enjoy the convenience and security it provides. Remember to always keep your keyless entry code and key fob in a safe place and avoid sharing them with anyone who shouldn’t have access to your car.
FAQs
Sure, here are three popular FAQs about resetting keyless entry on Ford Taurus, along with their answers:
Q: What should I do if my Ford Taurus’s remote keyless entry is not working?
A: If your remote keyless entry is not working, you may need to reset it. To do this, start by unlocking the driver’s door with the key. Turn the ignition to the “on” position, then press and hold the unlock button on the remote for four seconds. Then, release the button and turn the ignition off. Test the remote to see if it is working properly.
Q: Will resetting my Ford Taurus’s keyless entry erase any existing key fob programming?
A: No, resetting your Ford Taurus’s keyless entry will not erase any existing key fob programming. However, it may be necessary to reprogram your key fob after resetting the system. This can typically be done using the instructions in your owner’s manual.
Q: How can I tell if my Ford Taurus’s keyless entry system has been reset successfully?
A: To test whether your Ford Taurus’s keyless entry system has been reset successfully, try pressing the lock and unlock buttons on the remote. If the doors lock and unlock as they should, the reset was successful. If the remote still does not work, you may need to try resetting it again or take your car to a qualified mechanic for further diagnosis.
