Resetting Brinks 4-Digit Lock: Step-by-Step Guide

Brinks is a trusted manufacturer of various security solutions, including padlocks. Their 4-digit combination lock is a popular choice among homeowners and renters who want to secure their valuables. However, like any other locks, there may be situations where you forget your combination or need to reset it for security reasons.

In this guide, we’ll take you through the step-by-step process of resetting your Brinks 4-digit lock so that you can regain access to your valuable items with ease.

Resetting Brinks 4-Digit Lock: Step-by-Step Guide

Step 1: Open the Lock

The first step in resetting your Brinks lock is getting it open. If you already know the current combination and have simply forgotten one number, enter the old code on the lock and pull down on the shackle (the curved part that goes into the locking mechanism). Once it’s open, skip ahead to Step 3 below.

If you don’t know the existing code or if something else has gone wrong with your lock – like a broken shackle – use bolt cutters to remove it safely. Then proceed onto Step 2 below.

Step 2: Remove Back Cover

With your previous numbers wiped out, turn over your Brinks padlock so that you are looking at its back cover plate. Remove this by unscrewing any screws securing it in place using a screwdriver – Note that some models may not have visible screws as they might use press-fit pins instead.)

Step 3: Locate Change Lever

Once removed from its back cover plate exposing both sides of its internal system; look closely at
your opened padlock’s interior surface,and locate change lever located beside plastic wheels which contains from zero to nine figures etched around their circumference..

Step 4: Set Lever Position

Flip up change lever towards direction opposite shift position to sit snugly in a ‘neutral’ position. . Do not depress the lever while doing this.

Step 5: Establish Your New Combination

Turn each of the plastic wheels one at a time to set your new combination – Make sure it’s something you can easily remember but cannot be guessed by others.

Step 6: Verify Correct Configuration

Once all digits are set, turn back the change lever. Then scramble lock numbers and test opening with your new combination before closing and locking prior use.

By following these simple steps, you’ll have successfully reset your Brinks 4-digit padlock and secured your valuable items once again.

Remember that it is important to keep your combination secure yet memorable so that you don’t forget or lose it again. In addition to resetting often – sometimes several times per year depending on usage- when necessary, always ensure to clean and maintain lubrication if grit or debris accumulate inside which may hamper smooth operation..


Sure! Here are three popular FAQs with answers for “Resetting Brinks 4-Digit Lock: Step-by-Step Guide” that people often ask:

Q1. How do I reset my Brinks 4-digit lock combination?
A1. To reset your Brinks 4-digit lock combination, follow these steps:
– With the lock open, turn it over and locate the small red tab on the backside of the lock.
– Push in on this tab with a pen or other tool until you hear a click and then release it.
– On some models, you may need to enter one of your current combinations before resetting it.
– Set your new combination by turning the dials to your desired numbers while making sure they are aligned up with the index line in between each dial number set (e.g., if you want “1234,” align Dial A at “1”, Dial B at “2,” etc.)
– Test your new combination several times before locking it again.

Q2. What should I do if I forget my Brinks lock’s current combination?
A2. If you forget your Brinks lock’s current combination, there is no way to retrieve or reset it without knowing what its original combo was. However, try going back through any notes or instructions that came with your lock when purchased—there may be information about how to recover lost codes there.

If not successful, consider contacting Brinks as they offer locksmith services that can help get into locked safes and provide skilled advice on how best to proceed when experiencing technical difficulties like forgetting a code.

Q3. Can someone else easily reset my Brinks 4-digit lock without my knowledge?
A3.No one can change a locked padlock combo unless they know its existing code so even if anyone were able access to remove/replace internal components -the device won’t operate without right configuration of dials for unlock key which means only authorized persons have capability to reset the code.