Brinks 4-digit combination lock is a popular choice for securing bikes, lockers, luggage, cabinets and other personal belongings. However, there may be situations where the user forgets their existing combination or wants to change it for security reasons. Fortunately, resetting the Brinks combination lock is a fairly simple process that can be done in just a few steps.
In this article we will provide you with a step-by-step guide on how to reset your Brinks 4-digit combination lock.
What You Will Need
- Your Brinks 4-digit combination lock
- A small flat-head screwdriver
Steps to Reset Your Brinks Combination Lock
Follow these easy steps to reset your Brinks 4-digit combination lock:
Step 1: Open the Lock
To begin resetting your Brinks combination lock start by opening it using your current code if you remember it. If not proceed to step two as outlined below:
Step 2: Locate the Reset Button
Look closely at the back of your locked disarmed padlock and spot between two dials (an area which has no raised dots). Within this area lies an indented button.
Step 3: Press and Hold the Reset Button
Using a small flat-head screwdriver or similar device press down firmly on the little button located inside this hole/indentation until you hear an audible “click”. Keep pressing down on this button throughout all subsequent steps in order not to lose progress up until completion of setting new code.
Step 4: Choose Your New Code
Now turn each digit one by one around so they correspond with what new number sequence you would like for locking purposes then release/reset from any previous settings via pressing both buttons simultaneously again – put different numbers instead those default ones that came out of factory setting.
When finished selecting the code, be sure to write it down somewhere safe and memorable so that you won’t forget it. For security reasons, ensure that your new code does not include any personal information such as birth date or phone number.
Step 5: Test Your New Code
Turn each dial firmly to its new digit combination for locking purposes then secure with downward motion of shackle. Ensure they have all slipped in and aligned correctly then slide shackle up into the locked position (pull on it too just to make double check). Once confirmed press down firmly again onto indented button from step 3 until an audible “click” is heard – this will ensure that the changes stick compared to if nothing were pressed during lock setting process.
Congratulations! You have successfully reset your Brinks 4-digit combination lock.
Tips and Tricks
- If you cannot remember or find the original code that came with your Brinks combination lock, follow steps 2-3 above and begin by resetting any current configuration.
- Always set a new code on your Brinks combination lock after purchasing for security reasons.
- Consider using a different color cable tie around luggage handle when traveling so there’s no confusion with other bags which may look similar at destination in case yours gets misplaced along way, i.e., grab one black sock out suitcase wrap around handle colour match!
Conclusion
Resetting a Brinks 4-digit combination lock is easy if you follow these simple steps outlined above. It’s important to always choose a unique code for security purposes and never share it with anyone else. By doing so, you can rest assured that your belongings are well protected whenever you use your Brinks combination lock!
FAQs
Sure, here are three popular FAQs related to resetting Brinks 4-Digit Combination Lock along with their answers:
How do I reset my Brinks combination lock?
Answer: To reset your Brinks 4-Digit Combination Lock, follow these steps:
With the lock open, turn the shackle 180 degrees and press it down.
Hold down the shackle and set your own combination by turning dials.
Release the shackle and turn it back to its original position. Your new combination is now set.
What do I do if I forgot my Brinks lock combination?
Answer: If you forget your Brink’s lock combination, unfortunately, there is no way to access or reset the lock without either remembering the correct combination or contacting a locksmith for assistance.
Is there any way to override a locked-out Brinks lock?
Answer: No, there is no way to override a locked-out Brinks 4-Digit Combination Lock without knowing the correct code or resorting to destructive methods such as drilling. The only other option would be seeking assistance from a locksmith who may be able to assist in unlocking or resetting of the lock at an additional cost.
