Master Your Security: Change Digital Lock Code in Minutes

The years of traditional locks being used to secure people’s homes are long gone. With the age of smart home technology, keyless digital locks have taken over the market and provide added security and convenience for homeowners. One of the most important aspects of these smart locks is the ability to change digital lock codes easily, quickly, and at any time.

In this article, we will go over why it is essential to change your lock code regularly, how to do it for different types of digital locks available on the market today, as well as some tips and advice on choosing a high-quality lock with an easy-to-use code-changing system.

Master Your Security: Change Digital Lock Code in Minutes

Why Change Your Lock Code Regularly?

Just like you change passwords regularly for your email or other online accounts, changing your digital door lock code frequently can enhance your security by making it harder for someone else to guess or bypass. A recent study shows that about 43% of burglaries in America happened while people were at home [^1]. This makes having good quality electronic door locks just as important whether you are inside or outside your home.

Codes that haven’t been changed from their default setting can sometimes be easier targets since they may be publicly known information. Furthermore, if you’ve recently had guests staying in your house who you gave access via a set pin number combination but didn’t get a chance to delete after their leave – changing would be crucial because now anyone could enter without consent until changes made by you again.

Some signs also indicate when codes should be changed urgently like:

  • You suspect someone has tampered with the lock.
  • You have lost control/access over one or more keys
  • Someone who previously had legal access (such as past ex-partners) might still know existing passcodes/got hold up them.

How To Change Your Digital Door Lock Code

Changing codes might appear complicated initially, but it is relatively simple once you know what to do. The steps below will guide you through the process, and we break them down further for specific types of digital locks.

  • Check if the device has batteries installed or charged correctly
  • Identify procedure for selecting a new code
  • Input or set new passcode combination
  • Verify change by testing with old and new codes.

Changing Code On Different Types Of Digital Locks

There are many different brands and models of smart digital door locks on the market, but they all share some common general features that make changing passcodes possible. Let’s briefly go over how to change codes on some popular types:

Change Code On August Smart Lock Pro

August Smart Lock Pro is a popular brand among users who trust their security protocols. When it comes to changing your lock code on this model, follow these steps:

  1. Open August Home app > Tap lock icon
  2. Go into settings menu (gear icon) in top right corner.
  3. Select ‘Lock Settings’ > ‘Code Settings’
  4. Press “Master Passcode” then enter current code
  5. Select “Edit Master Passcode”
  6. Enter old master pin number first followed by desired new pin number.
    7.Enter again to confirm changes made

Change Code On Yale Assure Lock SL Key-Free Touchscreen Deadbolt

The Yale Assure Lock SL is another great option for homeowners looking for key-free electronic deadbolts with a touchscreen interface that can be operated remotely via smartphone apps like Samsung’s SmartThings® app . Here’s how to change your lock code:

1.Open keypad housing; remove battery cover .
2.Depress button located underneath coverspot using narrow tool/pin tip as shown at control panel level .
3.Immediate LEDs will display flashing green colour indicating readiness status upon which three digits from clearance/six-button sequence must be keyed continuously until alternate LED lighting appears-ceasing blinking-red, amber or green respectively.
4.Enter current combination pause for one second then input a new 4 to 8-digit code – letter codes not accepted.
5.Wait for beep sound before removing tool/pin tip from button.

Change Code On Kwikset SmartCode Electronic Deadbolt

The Kwikset SmartCode is an excellent choice of keyless electronic deadbolts that provides homeowners with security and convenience. Here’s how to change the lock code:

1.Open door and extend bolt into locked position.
2.Press “Program” button located on interior side of lock’s cover plate cover panel – wait three seconds until LED flashing shows up confirming correct mode entry
3.Input existing master pin followed by “#”.
4.Then enter desired code sequence followed “#” again
5.Finally, re-enter same combination once more.

Tips For Choosing A High-Quality Lock With Easy-To-Use Code-Changing System

When choosing a digital door lock with easy code-change features, it’s essential to look out for some specific qualities in the product. Some aspects could include:

  • Compatibility with smart home systems like Amazon Alexa, Google Assistant or Apple HomeKit
  • Battery life durability and replacement intervals if rechargeable options are unavailable
  • Wireless connectivity strength and range (Bluetooth vs Wi-Fi)
  • User-friendly interface: How simple is it to access setting menus?
  • Support quality:A good warranty coverage paves way for user confidence than those without warranties.


Changing your digital lock codes frequently can seem overwhelming but it is crucial in securing your home from intruders – especially when you’re away or don’t want unexpected visitors entering inside during awkward hours. This article has provided steps on how to changes locks on different models as well as tips on selecting high-quality devices that offer ease-of-use features. By following these guidelines, homeowners can take control of their security and peace of mind knowing they have locked up safely.

[^1]: 2020 National Crime Information Center data on burglaries in the US.


Sure, here are three popular FAQs related to changing the digital lock code and their respective answers:

How often should I change my digital lock code?
Answer: It is recommended to change your digital lock code every three to six months, or anytime you suspect that someone may have learned or obtained the current code. This helps ensure maximum security for your home.

What if I forget my digital lock code after changing it?
Answer: Most digital locks offer a backup option in case you forget your new code. This can include using a physical key, entering a master reset code provided by the manufacturer, or engaging with customer support for assistance.

Can all digital locks be changed using the same process?
Answer: No, each type of digital lock may have its own unique process for changing codes. It’s essential to refer to the user manual provided by the manufacturer for instructions specific to your device model and version number.

Remember that when changing your digital lock code, it’s always better to err on the side of caution and choose complex codes that are easy for you to remember but hard for others to guess or crack through brute force attacks.