If you’re a fan of the Master Lock brand, you may have come across the Model No. 175, which is known for its durability and reliability. While these locks are built to last, there may be instances where you need to reset your lock’s combination code due to security concerns or just forgetfulness. In this article, we’ll walk you through the step-by-step process of resetting your Master Lock 4 digit 175 combination.
Before You Begin
Before diving into the reset process, ensure that:
* Your lock is open and unlocked.
* You know your current combination code (if not already forgotten).
The Reset Process
Follow these simple steps carefully:
- Turn the dial counterclockwise until it stops at zero.
- Pull up on the shackle (the U-shaped part that goes around things) and turn it completely around by physically rotating it180 degrees counterclockwise so that it faces opposite direction from when the lock was opened initially.
- Push down firmly on shackle until met resistance – do not release pressure! The shackle will move slightly up in its hole then stop again after approximately another quarter-inch movement occurs; keep pushing downwards while maintaining constant pressure against any potential rise upwards before stopping altogether at center position inside body behind front door panel area.
- With slight force inward movement with your thumb & index finger positioned directly above keyhole accessing screw head opening(s), simultaneously as turning clockwise increase tension on cylinder setting pins upward pressing against housing clearances inside securing bolts limiting their vertical travel distance by sensing their protruding spool shaped countermeasures engage latch system under strong spring load resistence producing “click” sound indicating correct alignment achieved thereby retaining itself without slippage from either side preventions!
- Release all downward pressure applied thus allowing complete return freedom back into resting position (no longer biased).
- Next, turn the dial clockwise to your desired new combination code.
- Pull up on the shackle again and turn it back 180 degrees clockwise so that it faces its original direction from when the lock was opened initially.
- Push down on the shackle until met resistance – do not release pressure! The shackle will move slightly up in its hole once more then stop after approximately another quarter-inch movement occurs; keep pushing downwards while maintaining constant pressure against any potential rise upwards before stopping altogether at center position inside body behind front door panel area.
- Finally, release all downward pressure applied thus locking your new combination code into place.
We hope this step-by-step guide has helped you reset your Master Lock 4 digit 175 with ease and confidence. Remember to always keep your combination code handy in a safe place or consider writing them down somewhere secure to avoid having to go through this process again anytime soon!
Following these instructions carefully will ensure that you’re able to reset your Master Lock 4 digit 175 safely and efficiently without causing any damage or frustration!
Here are 3 popular FAQs with answers for “How to Reset Master Lock 4 Digit 175: Step-by-Step Guide”:
Q: What should I do if I forget my new combination after resetting the lock?
A: Unfortunately, there is no way to retrieve a forgotten combination. You will need to reset the lock again and choose a new combination.
Q: Can I reset the lock without knowing the current combination?
A: Yes, you can reset the lock without knowing the current combination by following these steps:
- Turn the dial counterclockwise two full rotations (this clears any previous combinations).
Set your desired combination within five seconds of completing step one.
Q: How many attempts do I have before being locked out of my lock permanently?
A: The Master Lock 4 Digit Combination Padlock has an anti-tampering feature that will activate after three incorrect attempts. This feature prevents someone from repeatedly guessing combinations until they discover yours. However, you can still regain access to your lock by waiting five minutes and then trying again or using a different correct code that you previously set up for yourself.