How to Install August Smart Lock: A Step-by-Step Guide

How to Install August Smart Lock: A Step-by-Step Guide


Smart locks have become increasingly popular among homeowners who are looking for added security and convenience. One of the best smart lock options on the market is the August Smart Lock, a reliable and easy-to-use device that can help enhance home security while simplifying access control. In this step-by-step guide, we will show you how to install an August Smart Lock in your own home.

What You’ll Need

Before getting started, make sure you have all the necessary tools and materials:

  • August Smart Lock
  • Phillips-head screwdriver
  • Drill (optional)
  • Power drill (optional)

Step 1: Remove Existing Deadbolt

The first step in installing an August Smart Lock is to remove your existing deadbolt. This will require unscrewing any screws holding it into place using a Phillips-head screwdriver. If necessary, use a drill or power drill for added leverage.

Step 2: Insert Adapter Plate

Once the deadbolt is removed, you need to insert the adapter plate into the hole where your old deadbolt used to be. The adapter plate should fit snugly inside this hole.

Step 3: Secure Adapter Plate with Screws

Using included screws from the kit that came with your smart lock, secure the adapter plate into place by screwing it onto both sides of your door.

Step 4: Attach Mounting Plate

Next, attach mounting plate onto adapter plates using provided screws.

Pro Tip:

Make sure mounting tab aligns properly with arrow on thumb turn.

Step5 : Connect Wires and Battery

Connect wires provided with metal cable connector to wire ports located internally behind mounting plate.
Insert four AA batteries supplied in battery compartment.
Consider choosing rechargeable batteries as they last longer than regular alkaline batteries.

Pro Tips:

Ensure colored circles on adapters match corresponding wires
Red to Red and White to White.

Step 6: Attach August Smart Lock

Attach your August Smart Lock onto the mounting plate. Slide it into place, making sure to line up any screws on the back of the smart lock with holes in the adapter plates.

Pro Tips:

Make sure logo on front matches logo on adapter plate.
Align top arrow indicated within circle.

Step 7 : Test Your Lock

Test out your new smart lock by trying both manual and app-enabled unlocking and locking mechanisms.

Congratulations! You have successfully installed an August Smart Lock in your home. Enjoy added convenience, security, and peace of mind knowing that your door is protected by a reliable device designed for modern living.


Installing an August Smart Lock is a straightforward process that can be completed by homeowners with little-to-no technical experience. By following these steps carefully, you can enjoy all the benefits of this highly-rated smart lock while enhancing home security and access control in just a few simple steps. Remember always double check all hardware connections to ensure they are secure before testing out new locks.


Here are three popular FAQs regarding how to install August Smart Lock, along with their answers:

Q: Do I need a professional installer to install an August Smart Lock?
A: No, you don’t necessarily need a professional installer. August Smart Locks are designed for easy installation and can typically be installed using only basic tools such as a screwdriver or power drill. However, if you’re not familiar with DIY projects or feel unsure about the process of installing a smart lock, it may be beneficial to seek assistance from a professional.

Q: Can I use my existing deadbolt with an August Smart Lock?
A: Yes, in most cases you can use your existing deadbolt alongside an August Smart Lock. The smart lock is designed to replace the interior portion of your existing deadbolt mechanism while keeping the exterior part intact so that your original key can still be used if needed.

Q: What should I do if there’s no Wi-Fi signal near the location where I want to install my August Smart Lock?
A: If there’s no Wi-Fi signal within range of your smart lock installation site, you have several options for connecting it to Wi-Fi instead. You can purchase and set up a Wi-Fi extender that extends the network into that area or consider using other devices like Wi-Fi bridges or mesh networks extenders that allow more reliable coverage over longer distances without losing connectivity speed.