Change Schlage Lock Code: Easy 4-Digit Tutorial

Change Schlage Lock Code: Easy 4-Digit Tutorial

Introduction

If you’re looking for ways to improve the security of your home, changing the code on your smart lock is a great place to start. One popular and reliable brand of smart locks is Schlage, known for their durability and ease-of-use. In this article, we’ll provide an easy 4-digit tutorial on how to change the code on your Schlage lock.

Step-by-Step Guide

Step 1: Access Programming Mode

Locate the programming button on your Schlage lock — it’s usually located under the cover plate or inside the battery compartment. Press and release it with a tool such as paperclip or pin, then wait for two beeps or one long beep.

Step 2: Enter Programming Code

Enter in your six-digit programming code followed by “#”. Your lock may have come with a default programming code out of the box; if so, refer to its user manual for instructions.

Step 3: Choose User Code

Select which user code you would like to change by pressing “1”, “2”, “3” or “4”. The codes are identified by their respective LED lights.

### Step 4: Program New Code
Enter in new four-digit access code that you wish to assign followed by “#”. Wait until there’s a long beep indicating that you’ve successfully programmed it into memory.

Additional Tips:

  • Always test each new user access codes thoroughly before relying upon them completely.
  • Consider using unique shared keys (or e-code) instead of assigning multiple access codes when granting occasional guest entry through smartphone app control.

Conclusion

Changing your Schlage lock’s access code can greatly enhance security measures around your home. Through our step-by-step guide above, now anyone without prior experience will be able ton easily update their own house protection system quickly!

FAQs

Sure, here are three popular FAQs with answers related to changing the Schlage lock code:

Can I change the code on my Schlage lock without a key?
Answer: Yes, it is possible to change the code on your Schlage lock without a key. Most Schlage locks come with a factory reset combination that can be used to reset or reprogram the lock’s access codes. Refer to your owner’s manual or online resources for specific instructions on how to complete this process.

How do I add new users and codes?
Answer: To add new users and access codes, follow these steps:

Enter in programming mode by entering the current 6-digit programming code within 5 seconds of removing the cover.
Press “Schlage” button
Enter in new user code
Press “Schlage” button again

Repeat above two steps for each additional user you want to add.
Once you exit programming mode, all newly added users will be able access your door using their assigned PINs.

Can I use letters instead of numbers for my access code?
Answer: No, most standard Schlage locks only accept numeric 4 digit codes as access codes. However there are some smart locks models that allow alphanumeric passcodes which include both numerals and alphabet characters. Check if your model supports it through product manual or consult customer service prior make any changes in setting up smart options like alphanumeric passcodes